Introduction

The "CNU-Aux" wireless network is available campus wide for Faculty and Staff that would like to connect devices such as; Streaming Media Players, SmartTVs, and other IoT devices to a wireless network. In order to connect these devices to the wireless network "CNU-Aux" please follow the steps below. The "CNU-Aux" wireless network will NOT support computers, smart phones, or tablets; please continue to connect those devices to eduroam for internet access.

Steps for Connecting Your Device to "CNU-Aux"

Step 1: Navigate to the CNU Connectivity Page

Go to the connect.cnu.edu page. From the option list, select “Begin CNU-Aux Registration”

Step 2: Registration Page

Enter you CNU email and password on the registration screen.

Step 3: Create Device

In the box that appears, enter the following information about the device you’d like to connect

Device Name = Enter a name of your choice
Device Type = From the dropdown menu select the correct device type
MAC Address = Enter your device's WiFi MAC Address
- For assistance finding the MAC Address of your device please visit the manufacturer's support website
Click the "Submit" button when finished

Faculty and Staff are permitted to register up to five devices.

Step 4: Record the "Connection Instructions"

After clicking the submit button you will be presented with important information required for connecting to the "CNU-Aux" wireless network. You will need this information when connecting your device to the wireless network.

Connect to the wireless network: CNU-Aux
- Security type = WPA2-Personal
- Encryption type = AES
Encryption "Pre Shared Key" = ************* (the key has been omitted in this document for security purposes)

Step 5: Connecting your Device to "CNU-Aux"

Follow the standard instructions for your wireless device to connect it.

If you lose or forget the connection instructions, log back into the CNU-AUX setup and click Manage Devices.

Connect my device to the "CNU-Aux" wireless network