Connecting Devices to eduroam for Students, Faculty, and Staff

Connecting Devices to eduroam for Students, Faculty, and Staff


Table of Contents


Introduction to eduroam

Eduroam (education roaming) is a secure, world-wide roaming access service developed for the international research and education community. Eduroam is available at thousands of institutions worldwide, see link for a full

list of eduroam participants https://eduroam.org/where/?location=us .

Christopher Newport is proud to offer eduroam network access across the entire campus for Students, Faculty, Staff, and Visitors! 

Connecting to the eduroam wireless network will allow access to campus resources. Please follow the steps below when connecting to the eduroam wireless network, once you have successfully connected to eduroam on campus, you may connect to the eduroam wireless network while visiting at any participating institution. 

Note: Due to recent changes in how this network is provided and certified, users whose device was enrolled more than three weeks from July 27, 2026 will need to re-certify their device to use eduroam using the steps outlined below.

 


Connecting a CNU Owned Device

Any device owned and maintained by Christopher Newport University will be configured for eduroam access; Students, Faculty, or Staff are not required to authenticate to eduroam on CNU owned devices. If you are having network connectivity issues with a CNU owned device please visit the IT Services help desk located in the Trible Library or submit a ticket online at help.cnu.edu.

 


Connecting a Personal Device to eduroam

Verify your device is connected to the internet via cellular service or you can connect to CNU’s Guest WiFi network “CNU-Guest”.

Once you have internet access, open a browser (i.e. Chrome, Edge, Firefox, Safari) and navigate to CONNECT.CNU.EDU

If you’re using an iPhone, navigate to CONNECT.CNU.EDU using Safari.

Click the "Begin eduroam Setup" link to download and install the Christopher Newport University Certificate Profile from SecureW2.

Begin eduroam setup

Click “Eduroam setup” to start the eduroam configuration assistant. Follow the instructions provided by the assistant to configure your computer and connect to the network.

Start config assistant

Troubleshooting

Apple Management Configuration Profile Removal

In most cases, if you are unable to successfully connect to eduroam, forget the network and wait 10 minutes before reconnecting. If you are using an Apple device and are unable to forget the network you may have a device “Management Configuration Profile” that needs to be removed.

Visit the following page here for detailed steps on how to remove a profile from your Apple device.

Android WiFi Settings

If you chose to authenticate to eduroam using a username and password please ensure the following settings are configured as shown below:

  • Security: 802.1x EAP

  • EAP method: PEAP

  • Phase 2 authentication: MSCHAPV2

  • CA certificate: Use System Certificate

  • Online Certificate Status: Do Not Verify

  • Minimum TLS Version: TLS v2.0

  • Identity: "Enter your CNU email address"

  • Anonymous Identity: "leave blank"

  • Password: "Enter the password associated with your CNU email address"

  • Domain Name: Christopher Newport University

 

Forgetting the Eduroam Network

Occasionally, you may have problems connecting to the Eduroam wifi. In this case, forgetting and re-adding the Eduroam network will usually fix the issue.

Windows

From the Start menu, go to the Settings app.

Click on Network & Internet, then WiFi, then Manage Known Networks

Look for Eduroam on the page that appears and click Forget.

Forget Network Windows

MacOS

Click the Apple menu, then System Settings.

Apple, then System Settings.

Click Wi-Fi in the sidebar.

Wifi in sidebar

Scroll down on the right and click Advanced.

click Advance

 

Click the menu button next to Eduroam, choose Remove From List, then click Forget to confirm.

Remove from List

iPhone/iPad

If you used SecureW2 to initially set up Eduroam, you’ll need to follow these instructions instead.

Go to Settings, then Wi-Fi.

Tap Edit in the corner of the screen.

Edit WiFi iPhone

Take either of these actions:

  1. Tap the delete button, then confirm by tapping Delete.

Delete Network iPhone
  1. Tap the More Info button, then tap ‘Forget this Network’.

image-20251103-190120.png

Android

Keep in mind that Android manufacturers can customize the operating system, so your screens may look slightly different.

Go to your Settings app and select Network & Internet.

Network and internet

Tap Internet.

Internet

Scroll to the bottom and tap Saved Networks.

Saved networks

Tap Eduroam.

Tap eduroam

Tap Forget.

forget

Once you can confirm that the device has forgotten the network, you can re-add it to the device using the methods described earlier in this article.