Introduction
The "CNU-Res" wireless network is available in all residence halls for the purpose of connecting devices such as; Gaming Consoles, Streaming Media Players, SmartTVs, and other IoT devices. In order to connect these devices to the wireless network "CNU-Res" please follow the steps below. The "CNU-Res" wireless network will NOT support computers, smart phones, or tablets; please continue to connect those devices to eduroam for internet access.
Please note - when following the steps below you must be connected to eduroam in order to access the "CNU-Res" device registration page.
Steps for Connecting your device to "CNU-Res"
(Step #2) Create Device
- Device Name = Enter a name of your choice
- Device Type = From the dropdown menu select the correct device type
- MAC Address = Enter your device's "WiFi" MAC Address
- For assistance finding the MAC Address of your device please visit your manufacturers support website
- Click the "Submit" button when finished
Students are permitted to register up to three devices only.
(Step #3) Record the "Connection Instructions"
- After clicking the submit button you will be presented with important information required for connecting to the "CNU-Res" wireless network. You will need this information when connecting your device to the wireless network.
- Connect to the wireless network: CNU-Res
- Security type = WPA2-Personal
- Encryption type = AES
- Encryption "Preshared Key" = *************
(Step #4) Connecting your SmartTV to "CNU-Res"
- Remember! You will need the connection instructions from the step above to connect your device to the wireless network "CNU-Res"
Samsung
- Please visit Samsung Support - LINK
Hisense
- Please visit Hisense support - LINK
LG
- Please visit LG support - LINK
VIZIO
- Please visit VIZIO support - LINK
TCL
- Please visit TCL support - LINK
Sony
- Please visit Sony support - LINK